Spare Part Washing Machine PYM1500

Spare Part washing machine

PYM 1500  Spare Parts washing machine is designed with the aim of cleaning parts of motor blocks, places such as auto shops, car repair shops, workshops making chippings.

The PYM1500 washer was designed for easy use in confined spaces and not to splash around. Because of such features, most of the industries that provide car wash service companies and vehicle repair and rectification services are popular in the machines.

PYM 1500 Part washing machine body is completely made of chrome. At the same time, the rotating basket and all other parts are hot dip galvanized and there is a guarantee of non-corroding.

 

Spare Parts washing machines are thermostat controlled, there are 2 resistances in the water tank. The task of these resistances is to heat the water placed in the bowl. The washing quality can be further increased with detergent to be placed in the water. Parts washing machines are easily supplied with detergents and are costly. The parts can be washed for 2-3 days with the detergent used in one time.

 

The loading car which is given as standard on the machine is designed to place the basket inside.

The parts washing machine rotary basket is designed as a wheeled and rail system,

 

The rotating and wheeled basket is towed to the loading car and the items to be washed are placed on this basket. The loading car is brought to the front of the parts washing machine and the pieces to be washed are placed in the washing hopper of the parts washing machine with the rotating basket.

An automatic closing piston front cover system is available. The front door of the parts washing machine does not start washing without closing, so that it does not cause any accident due to the safety sensors on the cover and it does not splash around when the door is open.

After sufficient heat and time adjustment is made from the control panel on the side of the part washing machine, the start button is pressed and the door automatically closes and the parts washing machine starts to wash.

 

After the rotating basket starts rotating in the machine, the detergent is sprayed with fixed nozzles from all over the basket.

At the bottom of the part washing machines there are 2 powerful water engines and these engines make the spraying process.

 

The parts washing machine has 500 lt of water in the washing cabinet. It draws water from the pumps to the nozzle line. There are filters for the water engines to keep small parts out of where the pumps are sucked.

 

The parts washing machines automatically reduce the electricity consumption by turning off the resistances after bringing the water to the desired temperature to the desired temperature. When the water in the reservoir falls below a certain level, it automatically re-engages to bring the water back to the set temperature.

The PYM 1500 spare parts washing machines run at 380 volts and have low energy consumption.

Parts washing machines are designed to be used for very long years, with almost no annual maintenance cost. Part washing machines are extremely simple to use and can be used without the need for specialist personnel.