PYM 1500  Spare Parts washing machine is designed with the aim of cleaning parts of motor blocks, places such as auto shops, car repair shops, workshops making chippings.

The PYM1500 washer was designed for easy use in confined spaces and not to splash around. Because of such features, most of the industries that provide car wash service companies and vehicle repair and rectification services are popular in the machines.

PYM 1500 Part washing machine body is completely made of chrome. At the same time, the rotating basket and all other parts are hot dip galvanized and there is a guarantee of non-corroding.

Spare Parts washing machines are thermostat controlled, there are 2 resistances in the water tank. The task of these resistances is to heat the water placed in the bowl. The washing quality can be further increased with detergent to be placed in the water. Parts washing machines are easily supplied with detergents and are costly. The parts can be washed for 2-3 days with the detergent used in one time.

The loading car which is given as standard on the machine is designed to place the basket inside.

The parts washing machine rotary basket is designed as a wheeled and rail system,

The rotating and wheeled basket is towed to the loading car and the items to be washed are placed on this basket. The loading car is brought to the front of the parts washing machine and the pieces to be washed are placed in the washing hopper of the parts washing machine with the rotating basket.

An automatic closing piston front cover system is available. The front door of the parts washing machine does not start washing without closing, so that it does not cause any accident due to the safety sensors on the cover and it does not splash around when the door is open.

After sufficient heat and time adjustment is made from the control panel on the side of the part washing machine, the start button is pressed and the door automatically closes and the parts washing machine starts to wash.

After the rotating basket starts rotating in the machine, the detergent is sprayed with fixed nozzles from all over the basket.

At the bottom of the part washing machines there are 2 powerful water engines and these engines make the spraying process.

The parts washing machine has 500 lt of water in the washing cabinet. It draws water from the pumps to the nozzle line. There are filters for the water engines to keep small parts out of where the pumps are sucked.

The parts washing machines automatically reduce the electricity consumption by turning off the resistances after bringing the water to the desired temperature to the desired temperature. When the water in the reservoir falls below a certain level, it automatically re-engages to bring the water back to the set temperature.

The PYM 1500 spare parts washing machines run at 380 volts and have low energy consumption.

Parts washing machines are designed to be used for very long years, with almost no annual maintenance cost. Part washing machines are extremely simple to use and can be used without the need for specialist personnel.

The post Spare Part Washing Machine PYM1500 appeared first on Safran Halı Yıkama Makinaları.

If necessary 100 m. The length of the pressure washer can be used with a washing hose and any performance loss will be minimized.

Due to the requirement of high pressure, the non-existent pressurized water provides privileges and differences according to many jobs without the need. Although it seems to be a pressure washing machine, it is more accurate to say that it is a pressurized water jet.

At these pressures, the washing machine must have the gun hose and the necessary safety systems to keep the pressure of the machine. Because it is not used in standard works such as car wash machines, it is highly likely that it will not have the pressure and water flow if it is claimed to be available everywhere. When the need for a pressurized washer is indicated, an analysis of the area to be used first is required. In the analysis of the site to be built, basic issues such as how fast it will be done, how efficient it will be and how to provide the necessary job safety will be taken into account.

The washing hose used in our machine is 4 times safer than the normal hose washing machine hose.

The pistol is triggered and untested, and the two main gurubas are separated in robustness to remove that pressure. The machine which is not triggered works by pressing the start button, or 10 seconds after pressing the Start button. then it will work. This time can be set. Our model with a trigger gun has a trigger system not only to cut off the water coming from the pistol like the car wash machines but also the system which will cut the water coming from the pump which is in the center of the machine.

Saffron HC 400 Similar areas where a pressure washer is needed.

• In the dismantling of rust in construction sprues and similar construction cleaning
• Materials to be removed from the products in the manufacturing factories
• Stratified and clean heavy floors
• Shipyard and ship cleaning
• Painted floors that need to be scrubbed with watery sand when necessary

Depending on the nature of the work, there are special accessories that can be used with a rotary nozzle, a juicy grommet, or a narrow and wide spray.

Some of the most important points are special pumps which will give you the necessary water except for the necessary pressure according to the situation of the job and motors that are compatible with this pump are required. Thanks to our experience and experience as Anadolu Teknik Makine, we produce pressure washing machines such as Safran HC 400 which are suitable for special projects and needs.

The post Pressure Washer HC400 appeared first on Safran Halı Yıkama Makinaları.

500 bar cold water pressure washing machine which is designed to be used in very different areas even though they are in the same category as car washing machines as working system, as damp sanding machine, in dirt scraping process, in dirt and rust removal processes on metal surfaces, truck box, concrete mixer is a high-pressure water jet designed for use in industrial cleaning jobs such as boat scraping.

The 500 bar pressure washer, which is used in the areas to be cleaned by water and sand blasting, is a washing machine with a power of 30 hp working with 380 volt electricity and a pressure pump of Italian origin and a water spraying capacity of 22 lt / min.

With 1400 rpm 30 hp engine and Italian made 22 lt / min pressure pump, pressure washer can be used anywhere where wet sanding is required.

The 500 bar washing machine, which is generally requested by the shipyards, can be operated for a long time. The 500 bar cold water high pressure washer designed on the wheel chassis can be moved when requested.

A standard 10 m hose is available on the 500 bar pressure washer. But it can be extended as long as desired.

It can be used easily in any kind of washing process thanks to the pressure which can be adjusted between 50 and 500 bar. If desired, the pressure can be reduced to 200 bar and used as a car washing machine.

The HC 500, 500 bar pressure washer locks itself to protect itself when the water level is insufficient. thus preventing the machine from being damaged.

The annual maintenance costs for 500 bar washing machines are very low. Depending on the duration of use, you may need to change the seal and fittings at least 2 times a year. These costs do not exceed 500 TL.

Even guns and nozzles used in 500 bar pressure washers are first class materials of European origin.

The service life of the 500 bar pressure washing machines is quite long when necessary maintenance is done.

When investigating the prices of high-pressure washing machines, the location of production, the location of the equipment used, the pressure of the pressure washer pump, the number of liters of water per minute, the quality of the pistol and the strength of the engine must be investigated to the finest detail.

The post High Pressure Washing Machine HC500 appeared first on Safran Halı Yıkama Makinaları.