Safran HC 400 pressure washer 21 lt. Industrial high pressure water cleaner is an industrial cleaning machine that can discharge water at a pressure of 400 bar per minute. It is a machine that has the effect on pressure and destruction power that normal car wash machines produce. Our machine, also known as pressurized water jetting, is used in specific areas.
If necessary 100 m. The length of the pressure washer can be used with a washing hose and any performance loss will be minimized.
Due to the requirement of high pressure, the non-existent pressurized water provides privileges and differences according to many jobs without the need. Although it seems to be a pressure washing machine, it is more accurate to say that it is a pressurized water jet.
At these pressures, the washing machine must have the gun hose and the necessary safety systems to keep the pressure of the machine. Because it is not used in standard works such as car wash machines, it is highly likely that it will not have the pressure and water flow if it is claimed to be available everywhere. When the need for a pressurized washer is indicated, an analysis of the area to be used first is required. In the analysis of the site to be built, basic issues such as how fast it will be done, how efficient it will be and how to provide the necessary job safety will be taken into account.
The washing hose used in our machine is 4 times safer than the normal hose washing machine hose.
The pistol is triggered and untested, and the two main gurubas are separated in robustness to remove that pressure. The machine which is not triggered works by pressing the start button, or 10 seconds after pressing the Start button. then it will work. This time can be set. Our model with a trigger gun has a trigger system not only to cut off the water coming from the pistol like the car wash machines but also the system which will cut the water coming from the pump which is in the center of the machine.
Saffron HC 400 Similar areas where a pressure washer is needed.
- In the dismantling of rust in construction sprues and similar construction cleaning
- Materials to be removed from the products in the manufacturing factories
- Stratified and clean heavy floors
- Shipyard and ship cleaning
- Painted floors that need to be scrubbed with watery sand when necessary
Depending on the nature of the work, there are special accessories that can be used with a rotary nozzle, a juicy grommet, or a narrow and wide spray.
Some of the most important points are special pumps which will give you the necessary water except for the necessary pressure according to the situation of the job and motors that are compatible with this pump are required. Thanks to our experience and experience as Anadolu Teknik Makine, we produce pressure washing machines such as Safran HC 400 which are suitable for special projects and needs.